Dust Free Wood Sanding (inspired by Carl Jacobson)


nouz bwyn
nouz bwyn

I swear i tasted wood dust and started coughing when he started sanding with the oil 😆

Vor 2 Monate
ArmouredKat
ArmouredKat

Mineral oil soaked wood. That'll be fun to varnish.

Vor 3 Monate
The Salty Cracker
The Salty Cracker

Great idea! Thanks

Vor 4 Monate
wakely wanderer
wakely wanderer

Does mineral oil raise wood fiber up like water does when conventional final wet sanding? Thanks.

Vor 9 Monate
kensukemuta
kensukemuta

Please buy the Autosol Metal Polish, use it after the CA Finishing, It will gives you a shiny surface you never imagine

Vor 10 Monate
Charles Hood
Charles Hood

Why do you use a super glue finish I’ve never heard of that before?

Vor 10 Monate
Momo Hunkerton
Momo Hunkerton

That is a very nice finish, I like

Vor 11 Monate
Nico NS
Nico NS

simply awesome

Vor 11 Monate
Le PicBois
Le PicBois

Yeah great tip! :)

Vor 11 Monate
Roman Craftchenko
Roman Craftchenko

as always great

Vor 11 Monate
Mark McCluney
Mark McCluney

That's a good tip - I'll try it soon. Thanks for sharing!

Vor 11 Monate
Alonzo Sanchez
Alonzo Sanchez

I'm A Little Late To The Party Busy Day, Nevertheless Amazing Video Brother!

Vor 11 Monate
Scott Kershaw
Scott Kershaw

Great video! I like the tip. Would you share why you don’t mix the oil with paste wax like Carl does? Was it because you’re going for a final CA finish for outdoor durability?

Vor 11 Monate
myster. E Jones
myster. E Jones

Is it merely an 'extraction issue! Or does the oil give a superior result? Does it have to be mineral oil? I'd initially think 'teak oil' as my first choice! thanking you in anticipation. E ,☺

Vor 11 Monate
myster. E Jones
myster. E Jones

The Small Workshop. I get that, makes sense, , does most of the mineral oil come out before finishing, would you clean it, or is it OK to mix it with the final coat? Thanks ☺

Vor 11 Monate
The Small Workshop
The Small Workshop

It's mainly to avoid fine airborne dust. It might also leave a better finish, not sure, but mostly I use it to avoid dust. The oil here is not the finish, it's just there to moist the wood and to clear the dust away from clogging up the sandpaper, kinda like knifemakers use wet sandpaper. That's why I use mineral oil, it's cheap, easily available and it does not harden.

Vor 11 Monate
jp woodwork
jp woodwork

CACAO!!! ;) Awesome

Vor 11 Monate
traderjoes
traderjoes

If they paper isn't clogging, I would think it means that the liquid is limiting the abrasives effectiveness of removing material. But, the clogging itself is also limiting the effectiveness... Its a balancing act..

Vor 11 Monate
Ovidiu-Florin BOGDAN
Ovidiu-Florin BOGDAN

Ulei mineral de la Ikea. 👍😁 și eu tot de ăla folosesc. Ce marcă și tip de șmirghel folosești?

Vor 11 Monate
Giurgiu Stefan
Giurgiu Stefan

Multumesc de raspuns. Micromesh se poate spala, desi nu stiu cum se spala de ulei. Orientativ - eu am cumparat un set de 9 buretei micromesh de 5x5cm (aprox) cu 10 lire. :P

Vor 11 Monate
The Small Workshop
The Small Workshop

Nu am micro mesh, cel mai fin pe care il folosesc e norton wet/dry de 1500 grit si se comporta foarte bine, practic am slefuit finisajul la 20 de manere ca cel din clip cu o singura bucatica de marimea unui timbru, cred ca se si vede in ultima scena din clip. Totusi la cat costa micro mesh eu nu as experimenta pe ele :)

Vor 11 Monate
Giurgiu Stefan
Giurgiu Stefan

Micro-mesh ai incercat cu ulei? daca da, cum se comporta?

Vor 11 Monate
Ovidiu-Florin BOGDAN
Ovidiu-Florin BOGDAN

Mulțumesc.

Vor 11 Monate
The Small Workshop
The Small Workshop

Norton, ca asta au la Leroy langa mine, dar e ok, sunt multumit de calitate.

Vor 11 Monate
Spencer Bass
Spencer Bass

Thanks for the response. Sorry to be a pain, but actually the whole CA thing has me confused. CA is a type of "super glue" correct? How do you apply it without the applicator sticking?

Vor 11 Monate
Joshua Scarlett
Joshua Scarlett

Charles Stromme Brown paper bags work good. Dry, they can burnish dust nibs, and act like super fine sand paper (think 10,000 grit), plus can be used to apply CA

Vor 2 Monate
Charles Stromme
Charles Stromme

Thanks to Carl I keep a can of paste wax/mineral oil mush on my shelf at all times. BUT ... I have NOT used it after the CA goes on. Only for pieces that need a satin/oil finish. After CA I just wet sand (with water) to 12000, apply two coats of plastic polish and call it good. I don’t understand how the oil helps a CA finish. Can you explain? I don’t apply much of anything with paper any more except CA, and then I only use paper shop towels, the traditionally blue ones. For everything else, especially the polish, I use clean cotton rags. Anything else sheds into the finish more than I care to deal with.

Vor 11 Monate
KingNast
KingNast

Spencer Bass I thought it would stick too, but it doesn't. It's weird. Just make sure to use the thinnest glue you can find. I used gel CA and it got all lumpy and I had to do a lot of sanding. It still came out like glass just with 600 grit, then a buffing wheel

Vor 11 Monate
The Small Workshop
The Small Workshop

You use tissue paper, the best kind is the one used in the kitchen, paper towels I think they are called. There are lots of videos demonstrating this technique since it's used a lot in pen turning: http://www.youtube.com/results?search_query=super+glue+pen+finish

Vor 11 Monate
aserta
aserta

Ditch the sand paper, take two types of steel wool, coarsest and finest, dip them both in your preferred finish oil (i use regular olive oil) and then with a glove wrap around the stock, as it rotates. First three times, you'll burn the finish, but once you get the kick right, once a light oil-ok lacquer is applied, it almost looks like glass glazed on top of the wood. Best results are cherry (and all the exotics that fit in that color range, i can't remember the name of the wood exactly, but it has a very equal pattern which gives beautiful almost reflective like finishes once lacquered) and very milky looking wood types. I've even tried this method on red balsa (the denser part of the balsa tree) wood and it gives great finish.

Vor 11 Monate
MK knives
MK knives

If only that worked with Green wood... But Green wood clogs up 10 times quicker than dry wood even though its full of moisture

Vor 11 Monate
Leaping Lemur Craftworks
Leaping Lemur Craftworks

I wonder how this would work using BLO followed by a CA finish. A lot of people will apply BLO to a pen AFTER sanding followed by or mixed with thin CA. The BLO acts as an accelerator, just not as fast as the spray stuff - that's my understanding of why they use BLO

Vor 11 Monate
DRMNZ
DRMNZ

Thanks. With the mineral oil that remains on the timer does this impact negatively with any finishes? Cheers, David.

Vor 11 Monate
Wemja
Wemja

water based finish will have issues with it, every finish with an apolar solvent (oils, mineral spirits or alcohol) should be ok.

Vor 11 Monate
The Small Workshop
The Small Workshop

For oil and wax finishes it should be ok. I also use superglue a lot as a finish and never had any problems with it. But you should experiment first to see how your finishes behave with this kind of treatment.

Vor 11 Monate
Spencer Bass
Spencer Bass

You wrote at the end a super glue finish. Did I miss something, wasn't it just mineral oil?

Vor 11 Monate
The Small Workshop
The Small Workshop

In the final shot the handle is presented finished with CA, which happened off camera. I just showed it for viewers to see how the wood looks after sanding, since the gloss finish shows the flaws in the wood.

Vor 11 Monate
Chris
Chris

Would that work too for hand sanding, but not on a lathe ? Or would that make just a big mess ?

Vor 11 Monate
Chris
Chris

The Small Workshop thanks for your reply. I think indeed you can easily end up with a big puddle of oil..

Vor 11 Monate
The Small Workshop
The Small Workshop

Chris I haven't tried hand sanding wood with oil but I've sanded metal with wet sandpaper by hand and it's really messy.

Vor 11 Monate
Tony Napoli
Tony Napoli

Thanks fir the tip 👍🇬🇧

Vor 11 Monate
Fancyturdhat
Fancyturdhat

So, instead of flying dust, you have flying oily dust?

Vor 11 Monate
The Small Workshop
The Small Workshop

Kinda, only it ends on your shirt not in your lungs.

Vor 11 Monate
yodu45
yodu45

thanks for the tip, no flying dust!!!

Vor 11 Monate

Nächstes Video

Woodturning -  Blue Planet 2 The Hybrid Globe

14:20

Antique Hatchet Restoration. Third Time's a Charm!

15:02

Antique Hatchet Restoration. Third Time's a Charm!

Black Beard Projects

Aufrufe 14 000 000

Wood carving. Подарок - ложка.

20:04

Wood carving. Подарок - ложка.

Амурские Украсы

Aufrufe 623 000

MONSTA X 몬스타엑스 'Alligator' MV

3:21

MONSTA X 몬스타엑스 'Alligator' MV

starshipTV

Aufrufe 4 920 107

Frozen 2 | Official Teaser Trailer

2:00

Frozen 2 | Official Teaser Trailer

Walt Disney Animation Studios

Aufrufe 30 753 504

Making STING RAY CLEAVER P1

08:33

Making STING RAY CLEAVER P1

SLAVIK TELY

Aufrufe 2 000 000

I TURN 2 HEX NUTS into a 1 Ct DIAMOND RING

12:13

I TURN 2 HEX NUTS into a 1 Ct DIAMOND RING

Pablo Cimadevila

Aufrufe 38 000 000

Making a Birdcage Awl from an old drill bit

11:33

Making a Birdcage Awl from an old drill bit

The Small Workshop

Aufrufe 1 400 000

いろいろ痛すぎるビスマス包丁と結晶

15:03

いろいろ痛すぎるビスマス包丁と結晶

圧倒的不審者の極み!

Aufrufe 6 300 000

Bottle Stopper with a Bee. Resin Art.

10:05

Bottle Stopper with a Bee. Resin Art.

jedrek29t

Aufrufe 2 900 000

Surprising De'arra for Valentine's Day *EMOTIONAL*

18:21

Emma Pretend Play w/ Luggage Suitcase Scooter Ride On Toy

11:50

TRY NOT TO Slide Down The WRONG WATER SLIDE!!

18:12

10 Things Not To Do at School..

4:57

10 Things Not To Do at School..

Guava Juice

Aufrufe 3 998 215

Why I’m Going To Be Single Forever

20:45

Why I’m Going To Be Single Forever

James Charles

Aufrufe 5 665 231

I Spent $1,000,000 In 24 Hours

19:08

I Spent $1,000,000 In 24 Hours

Tfue

Aufrufe 5 524 980

My secret mission to stop Tseries...

15:24

My secret mission to stop Tseries...

PewDiePie

Aufrufe 7 502 821

Johnny English Strikes Again | Ken Edgar | Regarder